Editorial Board Members

Editor-in-Chief

Alexander A. Ignatiev, D.Sc. in Engineering, Professor, Department of Technical Mechanics and Mechatronics, Yuri Gagarin State Technical University of Saratov.

Research interests: monitoring technological processes in manufacturing precision parts for mechanical engineering and instrumentation sectors using smart technologies; machine dynamics; eddy-current methods to control the grinding finish with application of pattern recognition methods.

Published papers:

1. Automated non-destructive testing in the monitoring system of the technological process of bearing production / A.A. Ignatiev, V.A. Dobryakov, S.A. Ignatiev et al. // Engineering Bulletin of the Don. 2021. No. 9 (electronic scientific journal) ivdon.ru/ru/magazine/archive/n9y2021/7193.
2. Ignatiev M.A., Ignatiev A.A. Recognition of defects in the surface layer of bearings based on fractal analysis of the eddy current signal // Bulletin of the AGTU. Series: Management, Computer Engineering and Computer Science. 2022. No. 2. P. 7-13.
3. Assessment of Machine Dynamic Quality on the Basis of Integrated Assessment of the Spectrum of Vibroacucoustic Vibration / Y.S. Shamsadova, M.S. Mintsaev, A.A. Ignatiev at al. // Proceedings of International Symposium Engineering and Earth: Applied and Fundamental Research. 2018. Т. 177. P. 467-470.
4. Automated measurements in process monitoring system in bearing production / A.A. Ignat’ev, B.A. Dobryakov, S.A. Ignat’ev at al. // Journal of Physics: Conference Series. 2020. Т. 515. № 052057.
5. Modeling and practical application of autocorrelation function of vibro-acoustic oscillations in machine dynamic system / A.A. Ignatiev, V.A. Dobryakov, S.A. Ignatiev et al. // IOP Conference Series: Materials Science and Engineering. 2021. Vol. 1047. No. 12005.
6. Ignatiev A.A., Dobryakov V.A., Ignatiev S.A. Applied system analysis of mechanical engineering objects. Saratov: SSTU, 2021. 160 p.

---

Deputy Editor-in-Chief

Yuri B. Tomashevsky, D.Sc. in Engineering, Professor, Department of Systems Engineering and Control in Technical Systems, Yuri Gagarin State Technical University of Saratov.

Research interests: building intelligent electric power systems based on the systems approach; designing intelligent systems; simulation and application of neural networks in control systems; fuzzy set theory for information systems; agent-based systems.

Published papers:

1. Synthesis of a fuzzy controller based on a numerical experiment with a control object / E.D. Karnaukhov, N.A. Kalistratov, E.E. Mirgorodskaya, N.P. Mityashin, Yu.B. Tomashevsky // Actual problems of electronic instrumentation APEP-2018: materials of the 13th International Scientific and Technical Conference. conf., Saratov, 27-28 Sep. 2018. Saratov: SSTU, 2018. pp. 241-248.
2. Procedures of multi-criteria selection in personnel management / E.E. Mirgorodskaya, N.P. Mityashin, Yu.B. Tomashevsky [et al.] // Bulletin of the Astrakhan State Technical University. Series: Management, Computer Engineering and Computer Science. 2019. No. 2. pp. 66-76.
3. Tomashevsky Yu.B., Timofeev M.N., Mirgorodskaya E.E. A program for determining the power balance in a microgrid based on calculating the power generated by renewable energy sources using fuzzy rules. Certificate of registration of the computer program RU 2019666065, 04.12.2019. Application No. 2019665032 dated 25.11.2019.
4. Al-Duheidahawi M.A.L., Al-Nasrawi F.H., Tomashevsky Yu.B. Improving the efficiency of brain-computer interfaces created on the basis of EEG signals // Modern science: actual problems of theory and practice. Series: Natural and Technical Sciences. 2022. No. 7. P. 18-26.
5. The use of a fuzzy measure of the value of criteria in multi-criteria selection / N.P. Mityashin, Yu.B. Tomashevsky, A.A. Dmitriev, A.V. Denisov // Automation and modern technologies, 2014. No 9. P. 38-42.
6. Optimization of the process of building a resource-technological model of a complex system / A.K. Porozhnyakov, Yu.B. Tomashevsky, N.P. Mityashin, E.Ya. Katz // Automation and modern technologies, 2014. No 12. P. 36-39.
7. Tomashevsky Yu.B., Denisov A.V. Intelligent system for diagnosing emergency modes in transformation complexes based on the neural network approach // Vestnik of the Saratov State Technical University. 2012. No. 1 (63). P. 94-98.

---

Secretary

Irina V. Zlobina, PhD (Technical Sciences), Associate Professor, Department of Technical Mechanics and Mechatronics, Yuri Gagarin State technical University of Saratov.

Research interests: materials science of polymer composites; modification of solidified materials using electrophysical effects.

Published papers:

1. Zlobina I.V. The effect of processing in a SHF electromagnetic field on the parameters of vibro-wave processes generated by the impact of a solid body in cured polymer composite materials under the influence of climate factors // JOP Conference Series: Metrological Support of Innovative Technologies. Krasnoyarsk Science and Technology City Hall of the Russian Union of Scientific and Engineering Associations. Krasnoyarsk, Russia, 2020. № 42045.
2. Zlobina I.V., Bekrenev N.V., Katsuba I.S. The effect of processing in a SHF electromagnetic field on the moisture absorption of cured polymer composite materials // IOP Conference Series: Materials Science and Engineering, Material Science and Aerospace Technology. 2020. V. 862. 022002.
3. Zlobina I.V., Bekrenev N.V. Microwave Electromagnetic Field Influence on the Stability of Reinforced Carbon Plastics with Built-In Lightning Protective Coating during Dynamic Loads Action // Materials Science Forum 2020. V. 992. P. 427-433.
4. Zlobina I.V., Bekrenev N.V., Muldasheva G.Studies of Microwave Electromagnetic Field Influence on Adhesion Strength of the “Matrix-Fiber" Contact Zone on the Example of the Elementary Cell of a Certified Polymer Composite Material // Materials Science Forum Studies of Microwave Electromagnetic Field. 2020. V. 992. P. 317-324.
5. Zlobina I.V. Change of rigidity of pcm modified in an ultrahigh frequencies electromagnetic field under the action of external factors // Materials Science Forum 2021. V. 1031. P. 234-241.

---

Publications Assistant

Ekaterina E. Mirgorodskaya, PhD (Technical Sciences), Associate Professor, Department of Systems Engineering and Control in Technical Systems, Yuri Gagarin State Technical University of Saratov.

Research interests: building intelligent electric power systems based on the systems approach; intelligent systems design; neural networks application in control systems.

Published papers:

1. A technique for multicriteria structural optimization of a complex energy system based on decomposition and aggregation / E. Mirgorodskaya, N. Mityashin, Y. Tomashevskiy, D. Petrov, D. Vasiliev // Studies in Systems, Decision and Control. 2021. Vol. 337. P. 194-208.
2. Multicriteria selection procedures in personnel management / E.E. Mirgorodskaya, N.P. Mityashin, Yu.B. Tomashevsky, A.V. Denisov, D.A. Vasiliev // Bulletin of the Astrakhan State Technical University. Series: Management, Computer Engineering and Computer Science. 2019. No. 2. P. 66-76.
3. Control systems of microwave dielectric heating installations with tunable frequency / A.V. Fedorov, Yu.S. Arkhangelsky, N.P. Mityashin, E.E. Mirgorodskaya // Questions of electrical technology. 2018. No. 1(18). P. 85-91.
4. Managing the structure of a flexible power supply system / Yu.M. Astapovich, N.P. Mityashin, Yu.B. Tomashevsky, E.E. Mirgorodskaya, A.V. Denisov // Mechatronics, automation, management. 2015. Vol. 16. No. 5. P. 337-343.
5. Synthesis of a fuzzy regulator based on a numerical experiment with a control object / E.D. Karnaukhov, N.A. Kalistratov, E.E. Mirgorodskaya, N.P. Mityashin, Yu.B. Tomashevsky // 2018 International Conference on Actual Problems of Electron Devices Engineering (APEDE' 2018): Conference Proceeding, Saratov, September 27-28, 2018. Vol. 2. P. 241-248.
6. Development of DC voltage converters for intelligent energy systems / E.E. Mirgorodskaya N.P. Mityashin, Yu.B. Tomashevsky, V.A. Kolchev, T.A. Vetkasova // Questions of electrical technology. 2019. No. 2. P. 91-100.

---

Editorial Board Members

Alexey N. Vasin, D.Sc. in Engineering, Professor, Department of Mechanical Engineering Technology, Yuri Gagarin State Technical University of Saratov.

Research interests: experimental study and mechanism analysis of centerless grinding used in machine parts for many industries.

Published papers:

1. The error of basing during centerless grinding of spherical rolling bodies / O.P. Reshetnikova, B.M. Iznairov, A.N. Vasin, N.V. Belousova, A.V. Panfilova // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 862. No. 3. St. 032010 (Scopus).
2. Investigation of the influence of processing modes on the efficiency of cleaning sheet metal for hollow balls from scale / A.V. Korolev, A.N. Vasin, A.V. Panfilova, O.P. Reshetnikova, B.M. Iznairov // Bulletin of the Voronezh State Technical University. 2020. No. 3 (16). P. 120-126.
3. Determination of microrelief parameters in the processing of spherical parts by centerless grinding / A.N. Vasin, O.P. Reshetnikova, B.M. Iznairov, N.V. Belousova, O.Yu. Davidenko, G.A. Semochkin // Journal of Physics: Conference Series. 2020. Vol. 1679. No. 4. St. 042078 (Scopus).
4. Determination of the value of the total error of the adjustment size during centerless grinding of balls / A.N. Vasin, O.P. Reshetnikova, B.M. Iznairov, N.V. Belousova, A.V. Panfilova // High-tech technologies in mechanical engineering. 2021. No. 2 (116). P. 14-19.
5. The mechanism of blade cleaning of rolled metal from scale / A.V. Korolev, A.N. Vasin, A.V. Panfilova, O.P. Reshetnikova, B.M. Iznairov // High-tech technologies in mechanical engineering. 2021. No. 11 (125). P. 12-19.

---

Sergey B. Venig, D.Sc. in Physics and Mathematics, Director of the Institute of Physics, Head of the Department of Materials Science, Technology and Quality Management, N.G. Chernyshevsky State University.

Research interests: materials science; nanotechnology and quality management.

Published papers:

1. Ermakov A.V., Lengert E.V., Venig S.B. Nanomedicine and drug delivery strategies for theranostics applications // Izvestiya of Saratov University. New Series. Series: Physics. 2020. Т. 20. № 2. С. 116-124.
2. Anikin A.A., Venig S.B., Zhukov A.G. Special features of analysis and control of concentration inhomogeneity of complexly modified industrial materials by the method of secondary-ion mass spectrometry // Metal Science and Heat Treatment. 2018. Т. 60. № 7-8. P. 478-481.
3. Preparation of biologically active nanocomposite / S.B. Venig, R.K. Chernova, V.G. Sergeants, T.Yu. Rusanova, E.I. Selifonova, G.N. Naumova, L.V. Pershina // Nanoelectronics, nanophotonics and nonlinear physics: sat. tr. XV All-Russian Conf. Saratov: SSU, 2020. P. 193-194.
4. Ermakov A.V., Lengert E. V., Venig S. B. Strategies in the field of nanomedicine and drug delivery for use in theranostics // News of Saratov University. A new series. Physics series. 2020. Vol. 20. Issue. 2. P. 116-124.
5. Effect of the Graphene Sheets on the Physical Properties of Copper Sulfide Nanoparticles / A.J. Al Alwani, Shipra Pandey, Shiv Pandey, A.A. Kletsov, S.B. Venig, E.G. Glukhovsky // Int. Nanoparticles Nanotech. 2019. V. 5. № 029.
6. Method of hardening of a steel surface / Anikin A.A., Venig S.B., Timofeev V.V., Ufaev A.G., Posenkov M.E.: RF Patent No. 2699599, C23C 26/00 (2019.05); C21D 1/78 (2019.05), application 26.10.2018, publ. 26.09.2019, BI No. 25. 9 p.
7. Novel type of hollow hydrogel microspheres with magnetite and silver nanoparticles / T. Lengert, A. Kozlova, A.M. Pavlov, V. Atkin, R. Verkhovskii, R. Kamushinsky, P. Demina, A.L. Vasiliev, S.B. Venig, T.V. Bukreeva // Materials Science and Engineering: 2019. V. 98. Iss. 5. P. 1114-1121.
8. Effect of Subphase Conditions on the Formation of Graphene Langmuir layers / A.J. Al-Alwani, A. Chumakov, O. Shinkarenko, M. Qassime, N. Begletsova, I. Gorbachev, S. Venig, A. Kazak, E. Glukhovsky // J. Phys.: Conf. Ser. 2018. V. 1135. Iss. 1. P. 012029.
9. Anikin A.A., Venig S.B., Zhukov A.G. Features of analysis and control of concentration in homogeneities of complex modified industrial materials by secondary ion mass spectrometry // Metallology and Heat Treatment of Metals. 2018. No. 7. P. 69-72.
10. The effect of Langmuir arachidic acid layers on surface morphology and electrical properties of a polycrystalline CdS film / S.A. Klimova, S.V. Stetsyura, S.B. Venig, M. Kaya, I. Dincer, Y. Elerman and A.A. Skaptsov // Int. J. Nanotechnol. 2018. Vol. 15. № 4/5. P. 402-416.

---

Alexander V. Gorokhovsky, D.Sc. in Engineering, Head of the Department of Chemistry and Chemical Technology, Yuri Gagarin State Technical University of Saratov.

Research interests: engineering and processing of polymers and polymer composites; nanotechnologies and nanomaterials (chemical technology); electrochemical technologies; corrosion protection systems.

Published papers:

1. Dielectric properties of PMMA/KCTO(H) composites for electronics components / M. Vikulova, A. Tsyganov, A. Bainyashev, D. Artyukhov, A. Gorokhovsky, D. Muratov, N. Gorshkov // Journal of Applied Polymer Science. 2021, 138(40), 51168.
2. Polytetrafluorethylene-based high-k composites with low dielectric loss filled with priderite (K1.46Ti7.2Fe0.8O16) / N. Gorshkov, V. Goffman, M. Vikulova, I. Burmistrov, V. Sleptsov, A. Gorokhovsky // Journal of Applied Polymer Science. 2019. No 48762. 8 p.
3. Dielectric properties of the polymer–matrix composites based on the system of Co-modified potassium titanate-polytetrafluorethylene / N.V. Gorshkov, V.G. Goffman, M.A. Vikulova, I.N. Burmistrov, A.V. Kovnev, A.V. Gorokhovsky // J. Composite Mat. 2018, V. 52. No 1. P. 135-144.
4. Carbon Modification of K1.6Fe1.6Ti6.4O16 Nanoparticles to Optimize the Dielectric Properties of PTFE-Based Composites / A. Tsyganov, M. Vikulova, D. Artyukhov, A. Bainyashev, V. Goffman, A. Gorokhovsky, N. Gorshkov // Polymers. 2022. V.14. 4010 (11 p).
5. 5. Zherdetsky N.A., Gorokhovsky A.V. Application of the pyrolytic Rock-Eval method to evaluate the catalytic activity of modified potassium polytitanates during the destruction of polypropylene // International Research Journal. 2022. No. 6. Part 1. P. 32-35.
6. Synthesis and properties of nanocomposites in the system of potassium polytitanate – layered double hydroxide / A.V. Gorokhovsky, A.R. Tsiganov, T.V. Nikityuk, J.I. Escalante-Garcia, I.N. Burmistrov, V.G. Goffman // J. Mater. Res. Technol. 2020. V. 9. No 3. P. 3924-3934.
7. Synthesis and electric properties of the high-k ceramic composites based on potassium polytitanate modified by manganese / A. Gorokhovsky, S. Saunina, L. Maximova, E. Tretyachenko, V. Goffman, J.I. Escalante-Garcia, M. Vikulova // Research on Chemical Intermediates. 2022. 48 (3). P. 1227-1248.
8. Synthesis, structure tribologicaland electrical properties of nanocomposite materials in the system of potassium polytitanate – layered double hydroxide – serpentinite / A. Tsiganov, A. Krivonogova, T. Nikityuk, O. Smirnova and A. Gorokhovsky // IOP Conference Series: Materials Science and Engineering. 2019. V. 560. # 012191 (7 p).
9. Quenching the fluorescence of alizarin complex one by iodine ions and potassium polytitanate in aqueous dispersions / E. Yu. Krugova, A. G. Melnikov, D.A. Bykov, A. V. Gorokhovsky, G. V. Melnikov //Journal of Advanced Materials and Technologies. 2022. Vol. 7. No. 3. P. 219-227.
10. Utilization of nickel-electroplating wastewaters in manufacturing of photocatalysts for water purification / A. Gorokhovsky, M. Vikulova, J.I. Escalante-Garcia, E.V. Tretyachenko, D. Kuznetsov, D. Yuri // Process Safety and Environmental Protection. 2020. V. 134. P. 208-216.
11. Carbon Modification of K1.6Fe1.6Ti6.4O16 Nanoparticles to Optimize the Dielectric Properties of PTFE-Based Composites / A. Tsyganov, M. Vikulova, D. Artyukhov, A. Bainyashev, V. Goffman, A. Gorokhovsky, N. Gorshkov // Polymers. 2022. V. 14. 4010 (11 p).
12. Data on the current-voltage dependents of nickel hollow microspheres based thermo-electrochemical in alkaline electrolyte / I. Burmistrov, N. Gorshkov, N. Kiselev, D. Artyukhov, E. Kolesnikov, B. Khaidarov, A.G. Yudni, Karunakarand, E.-B. Cho, D. Kuznetsov, A. Gorokhovsky // Data in Brief. 2020. V. 31. No 105770 (5 p).
13. 13. Energy storage devices with busophyte electrodes modified with titanium / V. G. Goffman, V. V. Sleptsov, A.V. Gorokhovsky, N. V. Gorshkov, N.N. Kovyneva, A.V. Sevryugin, M. A. Vikulova, A. M. Baynyashev, A.D. Makarova, Ch. Zo Lvin // Electrochemical energetics. 2020. V. 20. No. 1. P. 20-32.

---

Maxim V. Zhigalov, D.Sc. in Physics and Mathematics, Professor, Department of Mathematics and Modeling, reviewer to the journals: Computational and Applied Mathematics, Materials and Design, Chaos Solution and Fractal.

Research interests: mathematical and computer modeling; analysis methods for distributed mechanical nanostructures.

Published papers:

1. Mathematical modeling and methods of analysis of generalized functionally gradient porous nanobeams and nanoplates subjected to temperature field / J. Awrejcewicz, A.V. Krysko, A. Smirnov, L.A. Kalutsky, M.V. Zhigalov, V.A. Krysko // Meccanica. 2022. No. 57. P. 1591-1616.
2. On 3D and 1D mathematical modeling of physically nonlinear beams / A.V. Krysko, J. Awrejcewicz, M.V. Zhigalov, K.S. Bodyagina, V.A. Krysko // International Journal of Non-Linear Mechanics. 2021. Vol. 134. No. 103734.
3. Identifying inclusions in a non-uniform thermally conductive plate under external flows and internal heat sources using topological optimization / A.V. Krysko, J. Awrejcewicz, K.S. Bodyagina, M.V. Zhigalov, V.A. Krysko // Mathematics and Mechanics of Solids 5. 2021. https://doi.org/10.1177/10812865211048522
4. Mathematical Modelling and Numerical Analysis of Size-Dependent Structural Members in Temperature Fields. Regular and Chaotic Dynamics of Micro/Nano Beams and Cylindrical Panels / J. Awrejcewicz, A.V. Krysko, M.V. Zhigalov, V.A. Krysko. Springer, 2021. 402 p. https://link.springer.com/book/10.1007/978-3-030-55993-9
5. Mathematical and computer modeling of distributed mechanical nanostructures / V.A. Krysko, A.V. Krysko, S.P. Pavlov, O.A. Saltykova, M.V. Zhigalov. Saratov: SSTU, 2018. 432 p.
6. Mathematical and computer modeling of distributed mechanical systems / V.A. Krysko, A.V. Krysko, S.P. Pavlov, M.V. Zhigalov. Saratov: SSTU, 2018. 344 p.

---

Oleg V. Zakharov, D.Sc. in Engineering, Professor, Department of Technology of Mechanical Engineering, Yuri Gagarin State technical University of Saratov.
Expert to: Russian Science Foundation, QS and THE rating agencies, member of the Russian Transport Academy, All-Russian Society of Engineering and Design, and Union of Machine Builders of Russia.

Research interests: linear and angular measurements; surface metrology; theory of mechanisms and formation of composite surfaces; technologies, facilities and automation of abrasive machining; modeling mechatronic systems.

Published papers:

1. Zakharov O.V., Brzhozovskii B.M. Accuracy of centering during measurement by roundness gauges // Measurement Techniques. 2006. Vol. 49. P. 1094-1097.
2. Zakharov O.V. Guide wheels of centerless grinding machines // Russian Engineering Research. 2009. Vol. 29. P. 388-392.
3. Sklyarov I.A., Zakharov O.V., Kochetkov A.V. Increasing the Efficiency of Diagnostics of Gas Pipelines Based on Preliminary Abrasive Cleaning // Chem. Petrol. Eng. 2016. Vol. 52. P. 552-556.
4. Grechnikov F.V., Rezchikov A.F., Zakharov O.V. Iterative Method of Adjusting the Radius of the Spherical Probe of Mobile Coordinate-Measuring Machines When Monitoring a Rotation Surface // Measurement Techniques. 2018. Vol. 61. P. 347-352.
5. Aspects of Energy Saving of Oil-Producing Enterprises / K. Midor, T.N. Ivanova, M. Molenda, W. Biały, O.V. Zakharov // Energies. 2022. Vol. 15.

---

Albert V. Korolev, D.Sc. in Engineering, Professor, Department of Technology of Mechanical Engineering, Yuri Gagarin State Technical University of Saratov.

Research interests: manufacture, technology and quality of bearings; descaling system mechanisms with the use of edge cutting machining.

Published papers:

1. Korolev A.V., Okhlupin D.N., Sinev I.V., Avdonin K.A. Polishing of diamond-coated parts with various processing modes // Izvestiya Tula State University. Technical sciences. 2022. No. 9. P. 569-574.
2. Korolev A.V., Korolev A.A., Balaev A.F. Investigation of reduction of residual stresses of bearing rings during centerless running-in at the stage preceding assembly // Izvestiya Volgograd State Technical University. 2022. No. 3 (262). P. 16-19.
3. КKorolev A.V., Balaev A.F. Investigation of the effect of centerless running-in on the deviation from the roundness of bearing rings // Izvestiya Volgograd State Technical University. 2022. No. 3 (262). P. 19-22.
4. Korolev A.V., Panfilova A.V., Iznirov B.M., Reshetnikova O.P., Pavlova V.A. The mechanism of blade cleaning of rolled metal from scale // High-tech technologies in mechanical engineering. 2021. No. 11 (125). P. 12-19.
5. Korolev A.V., Okhlupin D.N. Formation of a homogeneous fine-grained metal structure in the process of casting parts // Scientific notes of the Crimean Engineering Pedagogical University. 2021. No. 2 (72). P. 256-262.
6. Okhlupin D.N., Korolev A.V., Sinev I.V. New material for anti-wear corrosion-resistant coating of agro industrial complex machinery parts // Development of the agro-industrial complex in the context of robotics and digitalization of production in Russia and abroad – DAIC 2020: Web of conferences. Ser. International scientific and practical conference. 2020. P. 1002.
7. Korolev A.V., Okhlupin D.N., Sinev I.V. Discrete friction mechanisms of a metal tool with polycrystalline diamond-coated detail // Journal of friction and wear. 2020. Vol. 41. No. 6. P. 538-542.
8. Casting method with the formation of a homogeneous fine-grained metal structure / Korolev A.V., Okhlupin D.N., Shvartsman A.A., Korolev A.V., Grishakov V.G., Rush S.Yu. Patent for invention 2765031 c1, 24.01.2022. application No. 2020139698 dated 01.12.2020.

---

Vadim A. Kushnikov, D.Sc. in Engineering, Director of the Federal R&D Center Subtropical Research Center of the Russian Academy of Sciences.

Research interests: systems analysis and management framework for complex industrial systems; identification and control of marginal situations in the management of complex man-machine systems; modeling changes in the characteristics of state security under conditions of negative external impulses.

Published papers:

1. The system of integrated modeling of the spread of fire hazards and evacuation of people from premises / A.D. Tsvirkun, A.F. Rezchikov, A.A. Samartsev, V.A. Ivashchenko, A.S. Bogomolov, V.A. Kushnikov, L.Yu. Filimonyuk //Automation and telemechanics. 2022. No. 5. P. 26-42.
2. Dolinina O.N., Kushnikov V.A. Methods and technologies of quality assurance of intelligent decision-making systems // Software engineering. 2021. Vol. 12. No. 4. P. 189-199.
3. Models and algorithms of the theory of automata for controlling a group of aircraft / V.A. Kushnikov, V.A. Ivashchenko, A.S. Bogomolov, L.Yu. Filimonyuk, A.F. Rezchikov // Automation and telemechanics. 2018. No. 10. P. 154-163.
4. Modeling complex for the analysis of critical combinations of events in aviation transport systems / A.S. Bogomolov, V.A. Ivashchenko, V.A. Kushnikov, A.F. Rezchikov, A.D. Tsvirkun, A.D. Tsesarsky, L.Yu. Filimonyuk // Problems of management. 2018. No. 1. P. 74-79.
5. Kushnikov V.A., Bogomolov A.S., Adamovich K.Yu. Mathematical modeling of the dynamics of safety indicators of the road transport system of the Russian region // News of Saratov University. A new series. Series: Mathematics. Mechanics. Computer science. 2018. Vol. 18. No. 2. P. 240-248.
6. ПPrevention of emergency situations during welding in robotic technological complexes / A.F. Rezchikov, V.A. Kushnikov, V.A. Ivashchenko, D.S. Fomin, A.S. Bogomolov, L.Yu. Filimonyuk // Bulletin of the Voronezh State University. Series: System Analysis and Information Technologies. 2017. No. 4. P. 46-55.

---

Tatiana G. Nasad, D.Sc. in Engineering, Head of the Department of Technology of Mechanical Engineering, Yuri Gagarin State Technical University of Saratov.

Research interests: increasing efficiency in machining component parts made of hard-to-cut materials through the use of advanced tools, machining techniques, and intellectual technologies.

Published papers:

1. Karsakova N.Zh., Sherov K.T., Nasad T.G. Questions of manufacturing of the part «Bed» of the submersible pump // Proceedings of the University. KarTU. № 1 (86). 2022. P. 16-22.
2. Modelling and practical application of autocorrelation functions of vibroacoustic oscillations in a machine dynamic system / A.A. Ignatyev, E.M. Samoylova, M.Yu. Zakharchenko, S.A. Ignatyev, V.A. Dobryakov, M.V. Vinogradov, T.G. Nasad, V.A. Karakozova // IOP Conference Series: Materials Science and Engineering. Krasnodar Science and Technology City Hall, Krasnodar, Russian Federation, 2021. P. 12005.
3. Analysis of errors in measuring displacement by a laser interferometer used as a feedback sensor precision lathe module feed drive / A.A. Ignatiev, E.A. Sigitov, V.A. Dobryakov, S.A. Ignatiev, A.A. Kazinsky, T.G. Nasad, L.G. Bokova // Journal of Physics: Conference Series. II International Scientific Conference on Metrological Support of Innovative Technologies (ICMSIT II-2021). Krasnodar, 2021. P. 52039.
4. Nasad T.G., Samoilova E.M., Babenko M.G. Quality management of forming parts in mechanical engineering // International scientific and practical journal Endless Light in Science, April 15-16, 2022, Almaty, Kazakhstan.
5. Analysis of methods for analytical determination of cutting temperature during thermal friction processing / S.S. Ainabekova, K.T. Sherov, A.V. Mazdubai, R.S. Gabdysalyk, A.K. Sherov // Mechanics and Technologies. KarTU. 2020. No. 3. P. 14-23.

---

Alexander F. Rezchikov, Corresponding member of Russian Academy of Sciences, D.Sc. in Engineering, Chief Research Fellow of the Institute of Control Sciences of RAS (Moscow).

Research interests: systems analysis and control of large-scale systems (social, technical, economic, man-machine, biological, etc.); modeling and optimization of industrial control systems and industrial diagnostics.

Published papers:

1. Dranko O.I., Rezchikov A.F. Forecast of the Industry Development as a Large System // IFAC-Paperonline. Amsterdam: Elsevier, 2022. 55 (3). P. 240-244.
2. Rezchikov A.F., Bogomolov A.S. System analysis of emergency combinations of events in the management of human-machine systems. Saratov: Saratov State University, 2021. 128 p.
3. Diagnostics and prevention of critical situations in technical, socio-economic and biological systems / V.V. Klyuev, A.F. Rezchikov, V.A. Kushnikov, V.A. Ivashchenko, A.S. Bogomolov, E.V. Kushnikova, V.A. Tverdokhlebov, B.V. Artemyev, L.Y. Filimonyuk. M.: LLC Publishing house «Spectrum», 2017. 174 p.
4. Development of a mathematical model for forecasting indicators of accreditation of technical universities in the Russian Federation / A.F. Rezchikov, V.A. Kushnikov, V.A. Ivashchenko, O.M. Tikhonova // Bulletin of the Astrakhan State Technical University. Series: Management, Computer Engineering and Computer Science. 2017. No. 2. P. 27-38.
5. Approach to ensuring and maintaining the safety of complex systems based on automatic models / A.F. Rezchikov, A.S. Bogomolov, V.A. Ivashchenko, L.Y. Filimonyuk // Management of large systems. 2015. No. 54. P. 179-194.
6. The system of integrated modeling of the spread of fire hazards and evacuation of people from premises / A.D. Tsvirkun, A.F. Rezchikov, A.A. Samartsev, V.A. Ivashchenko, A.S. Bogomolov, V.A. Kushnikov, L.Yu. Filimonyuk // Automation and telemechanics. 2022. No. 5. P. 26-42.
7. Modeling complex for the analysis of critical combinations of events in aviation transport systems / A.S. Bogomolov, V.A. Ivashchenko, V.A. Kushnikov, A.F. Rezchikov, A.D. Tsvirkun, A.D. Tsesarsky, L.Yu. Filimonyuk // Problems of management. 2018. No. 1. P. 74-79.
8. Prevention of critical combinations of events during welding by robotic technological complexes / A.F. Rezchikov, V.A. Kushnikov, V.A. Ivashchenko, D.S. Fomin, A.S. Bogomolov, L.Yu. Filimonyuk // Problems of mechanical engineering and machine reliability. 2017. No. 4. P. 60-71.
9. Prevention of emergency situations in the process welding in robotic technological complexes / A.F. Rezchikov, V.A. Kushnikov, V.A. Ivashchenko, D.S. Fominykh, A.S. Bogomolov, L.Yu. Filimonyuk // Bulletin of the Voronezh State University. Series: System Analysis and Information Technologies. 2017. No. 4. P. 46-55.

---

Igor V. Rodionov, D.Sc. in Engineering, Head of the Welding and Metallurgy Department, Yuri Gagarin State Technical University of Saratov.

Research interests: surface modification of structural materials using metal oxide compounds created by highly efficient thermal gas treatment technology and concentrated energy flux effects; laser sintering and laser powder welding technologies; surface nanostructuring and thin film coating methods.

Published papers:

1. Changes in morphology, structure and microhardness of zirconium alloy samples as a result of exposure to laser pulses / V.I. Proskuryakov, I.V. Rodionov, V.A. Koshuro, L.E. Kutz, I.V. Perinskaya // Letters in ZhTF. 2020. Vol. 46. Iss. 1. P. 12-15.
2. Proskuryakov V.I., Rodionov I.V. Formation of the composition and surface characteristics of chromium-nickel steel 12X18N10T during laser modification in a layer of experimental alloying coating // Journal of Technical Physics. 2022. Vol. 92. Iss. 1. P. 84-91.
3. Modeling of thermal processes in a surface layer of stainless chromium-nickel steel with laser pulse alloying / V.I. Proskuryakov, I.V. Rodionov, V.A. Koshuro, I.V. Perinskaya, L.E. Kutz // Fundamental problems of modern materials science. 2022. Vol. 19, No. 2. P. 243-257.
4. Proskuryakov V.I., Rodionov I.V. Laser pulse alloying of corrosion-resistant chromium-nickel steel 12X18N10T using graphite paste // Hardening technologies and coatings. 2020. Vol. 16. No. 5(185). P. 224-228.
5. Obtaining ultrafine structures on titanium alloy VT6 by laser dispersion of thin oxide films / V.I. Proskuryakov, I.V. Rodionov, E.V. Sitnikov, S.A. Borodina // Fundamental problems of modern materials science. 2020. Vol. 17. No. 1. P. 14-20.

---

Alexander A. Sytnik, Corresponding member of the Russian Academy of Education; D.Sc. in Engineering, Head of the Department of Information and Communication Systems and Software Engineering, Yuri Gagarin State Technical University of Saratov.

Research interests: mathematical methods of software modeling and data analysis; systems analysis and management of organizational and technical systems.

Публикации:

1. Сalculation models of energy consumption and methods of their analysis in decision support systems for industrial enterprises / N. Serdyukova, T. Shulga, A. Sytnik, S. Kumova // Society 5.0: Human-Centered Society Challenges and Solutions. Cham, 2022. P. 201-211.
2. System analysis of the process of determining the room category on explosion and fire hazard / Y. Nikulina, T. Shulga, A. Sytnik, O. Toropova // Studies in Systems, Decision and Control. 2021. Т. 337. P. 125-139.
3. The task of controlling robotic technological complexes of arc welding in unstable states / D. Fominykh, V. Kushnikov, V. Ivaschenko, A. Bogomolov, L. Filimonyuk, A. Rezchikov, A. Sytnik // Studies in Systems, Decision and Control. 2021. Т. 337. P. 3-13.
4. АAlgorithmic approach to the separation of the difference between two electromagnetic information signals close in frequency and phase shift / A.A. Sytnik, A.N. Karamyshev, A.A. Lvov, P.K. Plotnikov // Problems of management in socio-economic and technical systems: materials of the XVI International Conference. Saratov: SSTU, 2020. P. 353-362.
5. Sytnik A.A., Bogomolov A.S. The problem of emergency combinations of events in the management of organizational and technical systems // Informatization of education and science. 2020. No. 1 (45). P. 51-63.

---

Alexander A. Fomin, D.Sc. in Engineering, Head of the Department of Materials Science and Biomedical Engineering, Yuri Gagarin State Technical University of Saratov.

Research interests: design, strengthening and hardening of metalworking tools; metallography, analysis of surface morphology, chemical and phase composition of materials and coatings; hardware-software platform for processing visual displays to identify porosity, estimate statistical parameters of micro- and nanostructure components; investigation of mechanical properties (hardness, strength and ductility) of materials and coatings; induction heating, hardening and strengthening techniques for metals and alloys using high frequency currents; additive technologies and processing with concentrated energy flows, including plasma spraying, electric resistance welding, and electrical discharge alloying.

Published papers:

1. Palkanov P.A., Koshuro V.A., Fomin A.A. Influence of technological parameters of induction nitriding of tool steel P6M5 on microhardness and thickness of the diffusion layer // Bulletin of the Moscow Power Engineering Institute. 2022. No. 2. P 95-104.
2. Features of obtaining tantalum-containing coatings on titanium by magnetron sputtering / A.I. Shumilin, A.M. Zakharevich, A.A. Skaptsov, A.A. Fomin // Letters about materials. 2022. Vol. 12. No. 1 (45). P. 15-20.
3. Superhard Ta-O-N coatings produced on titanium using induction physical vapor deposition / V. Koshuro, M. Fomina, A. Zakharevich, A. Fomin // Ceramics International. 2022. V. 48. No. 13. P. 19467-19483.
4. Koshuro V., Fomina M., Fomin A. High-hardness carbide coatings and their production on X82WMoCrV6-5-4 steel using induction physical vapor deposition // Composite Structures. 2022. V. 281. Art. No 115045.
5. Simulation and experimental study of induction heat treatment of titanium disks / A. Fomin, V. Koshuro, A. Shchelkunov, A. Aman, M. Fomina, S. Kalganova // International Journal of Heat and Mass Transfer. 2021. V. 165. Art. No. 120668.
6. Functionally graded Ti(C,N) coatings and their production on titanium using solid-state carburization associated with induction heat treatment / A. Fomin, A. Voyko, M. Fomina, S. Mokrousov, V. Koshuro // Composite Structures. 2020. V. 245. Art. No. 112393.
7. Fomin A. Superhard titania coatings produced on titanium using induction heat treatment // Ceramics International. 2019. V. 45. №. 7. P. 8258-8264.

---

Andrey V. Yakovlev, D.Sc. in Engineering, Professor, Department of Chemistry and Chemical Technology, Yuri Gagarin State Technical University of Saratov.

Research interests: carbon nanomaterials, corrosion protection, composite materials, chemical sources of electric current.

Published papers:

1. Tseluikin V.N., Strilets A.A., Yakovlev A.V. On electrochemical deposition of zinc-based composite coatings modified with carbon nanotubes from an alkaline electrolyte // Physicochemistry of the surface and protection of materials. 2020. T. 56. № 6. P. 636-639.
2. Tseluikin V. N., Strilets A. A., Yakovlev A. V. Electrochemical Deposition of Zinc-Based Composite Coatings Modified with Carbon Nanotubes from Alkaline Electrolyte // Protection of Metals and Physical Chemistry of Surfaces 2020. Vol. 56. No. 6. P. 1186-1189.
3. Electrochemical dispersion of graphite in 58% nitric acid for the production of multilayer graphene oxide / E.V. Yakovleva, A.V. Yakovlev, A.S. Mostovoy, V.N. Tseluikin, I.N. Frolov // Izv. vuzov. Chemistry and chemical technology. 2021. Vol. 64. Iss. 3. P. 59-65.
4. Electrode for a supercapacitor based on electrochemically synthesized multilayer graphene oxide / N.V. Gorshkov, E.V. Yakovleva, V.V. Krasnov, N.V. Kiselev, D.I. Artyukhov, I.I. Artyukhov, A.V. Yakovlev // Russian Journal of Applied Chemistry. 2021. Vol. 94. No. 3. P. 370-378. 
5. Electrodeposition and corrosion properties of nickel–graphene oxide composite coatings // V. Seluikin, A. Dzhumieva, A. Yakovlev, A. Mostovoy, S. Zakirova, A. Strilets, M. Lopukhova // Materials. 2021. V. 14. № 5624.
6. Electrochemical deposition and properties of composite coatings nickel–chromium-graphene oxide / V.N. Tseluikin, A.S. Dzhumieva, A.V. Yakovlev, A. S. Mostovoy // Physicochemistry of the surface and protection of materials. 2021. Vol. 57. No. 6. P. 660-664.
7. Electrochemical Deposition and Properties of Nickel—Chromium–Graphene Oxide Composite Coatings / V.N. Tseluikin, A.S. Dzhumieva, A.V. Yakovlev, A.S. Mostovoy // Protection of Metals and Physical Chemistry of Surfaces, 2021. Vol. 57. No. 6. P. 1231-1234.
8. Reinforced epoxy composites modified with functionalized graphene oxide / A. Mostovoy, A. Shcherbakov, A. Yakovlev, S. Arzamastsev, M. Lopukhova // Polymers. 2022. V. 14. Р. 338.
9. Investigation of the properties of epoxy nanocomposites modified by functionalized multilayer carbon nanotubes / A.S. Mostovoy, A.V. Yakovlev, V.N. Tseluikin, A.A. Strilets // Journal of Applied Chemistry. 2022. Vol. 95. Iss. 1. pp. 73-81.
10. Electrochemical deposition of composite coatings nickel–graphene oxide in reverse mode / V.N. Tseluikin, S.M. Zakirova, A.S. Mostovoy, A.V. Yakovlev, A.S. Dzhumieva // Physicochemistry of the surface and protection of materials. 2022. Vol. 58. No. 2. P. 203-206.

---